Infrared beam PXB-100SW

The PXB-100SW infrared beam is a device equipped with 4 synchronised high power beams that reach up to 100 metres (outdoor) and 200 metres (indoor). Essentially a low power barrier, it is designed to be driven by a BA-6SLA solar panel unit or by power generators for wireless or remote applications without cabling infrastructure.

Description:

The PXB-100SW infrared beam is a device equipped with 4 high power synchronised beams reaching up to 100 metres (outdoor) and 200 metres (indoor). Essentially a low power barrier, it is designed to be driven by a BA-6SLA solar panel unit or by power generators for wireless or remote applications without wired infrastructure.

Product Features:

  • 4 synchronised high power beams
  • Low power consumption for battery or solar operation
  • 4 selectable beam channels to prevent interference
  • Double modulation for light immunity
  • Increased beam spacing to minimise false alarms
  • Vivid colour inside to aid the beam alignment process
  • Lightning and surge protection up to 15 kV
  • Environmental monitoring circuitry
  • Dynamic locking of the automatic magnification function (AGL)
  • 50,000 lux sunlight immunity
  • IP65 enclosure
  • Optional BA-6SLA solar panel and battery pack available.

Technical Features / Specifications:

Model PXB-100SW
Product type Photoelectric beam sensor
Detection system Pulsed infrared beam interruption system

(simultaneous interruption of 4 Tx/Rx beams)

Infrared beam Infrared LED double-modulated pulsed beam
Protection distance 100 m outdoors or less | 200 m indoors or less
Max. range 1000 m outdoors or less | 1000 m indoors or less
Response time 0.05 sec. to 0.7 sec. (adjustable via potentiometer)
Power supply 12 V to 30 VDC (polarity)
 

 

Consumption *1 (arming)

*2 (beam alignment)

5 a 8VDC 10s 30VDC
Transmitter

Max.: 3.7mA * 1

Max.: 8.2mA * 2

Transmitter

Max.: 5.2mA * 1

Max.: 9.4mA * 2

Receiver

Max.: 2.3mA * 1

Max.: 10mA * 2

Receiver

Max.: 3.1mA * 1

Max.: 10.7mA * 2

 

Alarm output

Dry contact relay output: NO/NC switchable

Contact action: interrupting time (2 sec. min.)

Contact rating: 30V AC/DC 1A (resistive load)

Protective resistor

 

Environmental output

Dry contact relay output: N.O./N.C. switchable

Contact action: activated when weather conditions worsen. Capacity: 30V AC/DC 1A

(resistive load) Protection resistance

 

Tamper output

Dry contact relay output: N.C. Action: activated when cover is removed. Capacity: 30V AC/DC 1A

(resistive load) Protection resistance

Alarm LED Red LED (Receiver) : ON: when an alarm is triggered
LED dimming Red LED (Receiver) : ON: when beam is cut off
Ambient temperature range -35°C a +66° C (-31° F a +151° F)
Beam adjustment Horizontal: ± 90°, Vertical: ± 20°
 

 

Funtiones

Frequency modulation beam selection,
Tone indicator,
Environmental module,
Beam power selection,
Transmission power adjustment,
Alarm output selection,
Environmental output selection,
Voltmeter,
Tamper,
Response time adjustment,
Upper/lower beam switch,
Wireless verifier.
Mounting positions Outdoor / Indoor
IP classification IP65
Wiring Terminals
Weight Transmitter: 1400 g | Receiver: 1470 g
Aspect Polycarbonate resin (burgundy)Brand: TAKEX

Number of beams:

4

Technology:

Infrared beams for perimeter protection.

Via Radio

Compatible Accessories:

TAKH bracket for mounting on perimeter pillar

Battery Pack - Power Supply

Contact