Infrared beam PXB-100SW
The PXB-100SW infrared beam is a device equipped with 4 synchronised high power beams that reach up to 100 metres (outdoor) and 200 metres (indoor). Essentially a low power barrier, it is designed to be driven by a BA-6SLA solar panel unit or by power generators for wireless or remote applications without cabling infrastructure.
Description:
The PXB-100SW infrared beam is a device equipped with 4 high power synchronised beams reaching up to 100 metres (outdoor) and 200 metres (indoor). Essentially a low power barrier, it is designed to be driven by a BA-6SLA solar panel unit or by power generators for wireless or remote applications without wired infrastructure.
Product Features:
- 4 synchronised high power beams
- Low power consumption for battery or solar operation
- 4 selectable beam channels to prevent interference
- Double modulation for light immunity
- Increased beam spacing to minimise false alarms
- Vivid colour inside to aid the beam alignment process
- Lightning and surge protection up to 15 kV
- Environmental monitoring circuitry
- Dynamic locking of the automatic magnification function (AGL)
- 50,000 lux sunlight immunity
- IP65 enclosure
- Optional BA-6SLA solar panel and battery pack available.
Technical Features / Specifications:
| Model | PXB-100SW | |
| Product type | Photoelectric beam sensor | |
| Detection system | Pulsed infrared beam interruption system
(simultaneous interruption of 4 Tx/Rx beams) |
|
| Infrared beam | Infrared LED double-modulated pulsed beam | |
| Protection distance | 100 m outdoors or less | 200 m indoors or less | |
| Max. range | 1000 m outdoors or less | 1000 m indoors or less | |
| Response time | 0.05 sec. to 0.7 sec. (adjustable via potentiometer) | |
| Power supply | 12 V to 30 VDC (polarity) | |
|
Consumption *1 (arming) *2 (beam alignment) |
5 a 8VDC | 10s 30VDC |
| Transmitter
Max.: 3.7mA * 1 Max.: 8.2mA * 2 |
Transmitter
Max.: 5.2mA * 1 Max.: 9.4mA * 2 |
|
| Receiver
Max.: 2.3mA * 1 Max.: 10mA * 2 |
Receiver
Max.: 3.1mA * 1 Max.: 10.7mA * 2 |
|
|
Alarm output |
Dry contact relay output: NO/NC switchable
Contact action: interrupting time (2 sec. min.) Contact rating: 30V AC/DC 1A (resistive load) Protective resistor |
|
|
Environmental output |
Dry contact relay output: N.O./N.C. switchable
Contact action: activated when weather conditions worsen. Capacity: 30V AC/DC 1A (resistive load) Protection resistance |
|
|
Tamper output |
Dry contact relay output: N.C. Action: activated when cover is removed. Capacity: 30V AC/DC 1A
(resistive load) Protection resistance |
|
| Alarm LED | Red LED (Receiver) : ON: when an alarm is triggered | |
| LED dimming | Red LED (Receiver) : ON: when beam is cut off | |
| Ambient temperature range | -35°C a +66° C (-31° F a +151° F) | |
| Beam adjustment | Horizontal: ± 90°, Vertical: ± 20° | |
|
Funtiones |
Frequency modulation beam selection, Tone indicator, Environmental module, Beam power selection, Transmission power adjustment, Alarm output selection, Environmental output selection, Voltmeter, Tamper, Response time adjustment, Upper/lower beam switch, Wireless verifier. |
|
| Mounting positions | Outdoor / Indoor | |
| IP classification | IP65 | |
| Wiring | Terminals | |
| Weight | Transmitter: 1400 g | Receiver: 1470 g | |
| Aspect | Polycarbonate resin (burgundy)Brand: TAKEX | |
Number of beams:
4
Technology:
Infrared beams for perimeter protection.
Via Radio
Compatible Accessories:
TAKH bracket for mounting on perimeter pillar
Battery Pack - Power Supply
